Balanced Belting is an economical weave with high tensile strength and minimal tendency to creep to either side of the drive pulley. These features make the Balanced Belt a most suitable belt for many applications.


Double Balanced Belts are primarily considered for high temperature applications or in the bakery and food processing industries.

Double Balanced Belting consisting of pairs of interlaced right and left handed spirals, is suitable for ambient medium and high-temperature applications.


Gratex Belts are commonly preferred with Conveyors handling small parts and heavy loads.

Gratex Belting, is similar to Balanced Belting except that the spirals are more closely wound with a straight rod connector produces a stronger semi-closed mesh ideal for carrying small parts and heavy loads.


Duplex Belts are employed to carry small parts through quench tanks and for high temperature furnace requirements.

Duplex Belting is a close mesh with a smooth carrying surface, most efficient for carrying small parts or parts that would be marked by a more open mesh. Woven of pairs of spirals, each pair turned into the preceding pair and reinforced with a rod through the hinging point. Duplex Belting has high strength.


Compound Balanced belts are often selected as baking bands or for unstable items needing very flat surfaces and considerable product support.

Compound Balanced Belting has right and left spirals fitted closely together for a smooth, dense weave, making it excellent for Conveying very fine or small products as well as unstable or top-heavy items. The LK3 baking band is a compound Balanced Belt which is used extensively in baking cookies, crackers and snack foods.

    The most widely used type of Conveyor belt is the friction driven woven wire belt. It is driven entirely by frictional contact between the Belt surface and the drive roll surface. These Belts offer the most favourable combination of strength, cost, durability and maintenance.

Compound Balanced Weave Type L.K. 3 in 2,3,4 and 5 Rod Series	Balanced Weave Type L.K. 4	Balanced Weave Type L.K. 5
Balanced Weave Type L.K. 6	Balanced Weave Type L.K. 7	Balanced Weave Type L.K. 9
Balanced Weave Type L.K. 16 (Lehr Belt)	Balanced Weave Type L.K. 17 (Lehr Belt)	Balanced Weave Type L.K. 19 (Lehr Belt)
Duplex Weave Type L.K. 52	Duplex Weave 36-18-12-10	Rod Reinforced 24-24-12-12

Type L.K. 16 Flat Specification : 36-22-3x1.75-12

Type L.K. 5 Flat Specification : 60-40-2x1-16

Type L.K. 3 Flat Specification : 60-80-1.6 x 0.7-18

Honey Comb As per customer requirement

Specially designed for sterilisation tunnels, drying of PVC liners in crown corks and other positive drive operations.






When additional strength is required; when Belt tracking needs to be controlled; when passing through liquids; when free spanning without support under the Belt is needed - chain driven belts are the best. They are also used for critical timing and when guard plates and flights are required.



To contain a depth of material or to handle products which might roll off a belt. Retaining edges may be extensions or modifications of the belt fabric as shown in the photograph or may consist of guard plates which are attached to the Belt.

R.D. Ashar Pvt Ltd.
R. D. Ashar Compound,
Main Road (Near Road No 27),
Wagle Industrial Estate, Thane (W),
Maharashtra  400 604.
India.

Email Address :- ashargrp@bom5.vsnl.net.in

Web Site :- www.ashargroup.com

Tel :- 91-22-2582 3739 
Fax :- 91-22-2582 0864